Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1025

setVerbose setVerbose Specifies module verbose level. Synopsis setverbose [module_name][level] Description Use this command to set the verbose level of the specified module. These levels filter the display of the debug message to the serial console. By default, no debug messages are displayed. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: module_name Specify the name of the module for which the verbose level is to be set; module names are case-sensitive. level Specify the verbose level (0 to 9). Examples SEE ALSO To set the verbose level of a module named NS to value 3: switch:admin> setverbose NS 3 switch:admin> dbgshow NS Module NS, debug level = 0, verbose level = 3 dbgShow, setDbg Brocade Fabric OS Command Reference 1001 53-1004112-02