Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 737

portCfgOctetSpeedCombo combo 1 2 3 -default Specifies the speed combination for the ports in the octet. The following speed combinations are supported: Supports autonegotiated or fixed port speeds of 32 Gbps, 16 Gbps,8 Gbps,4 Gbps, and 2 Gbps. 2 Gbps speed is not supported on Brocade G620 switch. Supports autonegotiated or fixed port speeds of 10 Gbps,8 Gbps,4 Gbps, and 2 Gbps. 2 Gbps speed is not supported on Brocade G620 switch. Supports autonegotiated or fixed port speeds of 16 Gbps and 10 Gbps. Not supported on Brocade G620 switch. Sets all octet combination values back to the default value of 1. Examples To configure the ports in first octet for combination 3 on a Brocade 6510: switch:admin> portcfgoctetspeedcombo 3 3 To reset the combination to default: switch:admin> portcfgoctetspeedcombo 3 -default To switch from combo 3 to combo 2 and there are online ports running at 16G speed.: switch:admin> portcfgoctetspeedcombo 2 2 The following ports must be disabled or \ speed configuration needs to be change. Please retry the operation after taking appropriate action. Speeds supported for octet combo 2 - [10G,8G,4G,2G,AN] Port Speed 0 16* 1 N16+ 2 N16+ 3 N16+ 4 N10+ 5 N16+ 6 N16+ 7 N16+ * Port speed configuration must be changed + Port must be disabled Setting octet speed combo failed SEE ALSO portCfgSpeed, switchCfgSpeed Brocade Fabric OS Command Reference 713 53-1004112-02