Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 487
notation. For nonblade systems, the port number on the silkscreen is the, area number
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 487 highlights
itemList Notes The exact type of list varies, depending on the test and the parameter; however, the most common are blade ports and user ports. A list of blade ports is most commonly used by ASIC-level tests such as turboRamTest and represents which ports on the current blade (specified with --slot number) are tested. A list of user ports is used by higher-level tests to specify which user-accessible external ports within the current switch (selected during Telnet login) are tested. When specified in an item list, user ports might be specified by either the area portion of the ports Fibre Channel address or with slot/port notation. For nonblade systems, the port number on the silkscreen is the area number, so the two notations are identical. For item list parameters, the parameter type is PT_LIST and the list type is one of the following: Type Grouping Description BPORTS Blade Blade ports, internal and external ports. UPORTS Switch User ports, ports with external connections. QUADS Blade Quadrants, group of (normally 4) ports. CHIPS Blade Chips, Asics within a blade. MINIS Blade Mini switches. SLOTS Chassis Slots. INDEX N/A Anything. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples None SEE ALSO portLedTest, portLoopbackTest Brocade Fabric OS Command Reference 463 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/487.png)