Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 650
Modifies a TCL., Creates a TCL.
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 650 highlights
portCfg 626 --enable -autoneg Enables the auto negotiation mode for the LAG port members. --disable -autoneg Disables the auto negotiation mode for the LAG port members. tcl Creates a TCL. This command supports create, modify, and delete options only. The syntax for portcfg tcl is as follows: portcfg tcl name option [args] Valid options and arguments for tcl include the following: name Specifies the name of the TCL. The TCL name can be up to 31 characters long and cannot contain special characters. create name [args] Creates a TCL. modify name [args] Modifies a TCL. -p | --priority value Sets the priority ID for the TCL. The range is from 1 through 65534. --admin-status enable | disable Enables or disables the TCL. --action allow | deny | [slot/]dp#-deny Specifies the permit or deny action associated with the TCL. -t | --target VE[-pri] Sets the target virtual interface and priority for the TCL. -S | --src-addr ipaddr[/prefix_len] Sets the source IP address input filter for the specified TCL. --src-mask ipaddr Sets the source IP address mask input filter for the specified TCL. -D | --dst-addr ipaddr[/prefix_len] Sets the destination IP address input filter for the specified TCL. --dst-mask ipaddr Sets the destination IP address mask input filter for the specified TCL. --proto-port ipaddr Sets the protocol port input filter for the specified TCL. --proto-app app_name Sets the application input filter for the specified TCL. --dscp value Set the DSCP input filter for the specified TCL. The range is from 0 through 63. Brocade Fabric OS Command Reference 53-1004112-02