Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 819

portLoginShow portLoginShow Displays port login status of devices attached to the specified port and the details of the last logged out device. Synopsis portloginshow [slot/]port [-history] Description Use this command to display port login status received from devices attached to the specified port. For each login, this command displays the following fields: Type Type of login can display one of the following: fd FDISC, Discover F_Port Service Parameters or Virtual N_Port login. fe FLOGI, Fabric Login to Fabric F_Port. ff PLOGI, Port Login to specific N_Ports or well-known addresses like Name Server. PID The 24-bit Port ID of the attached device. WorldWideName The port's world wide name. credit The credit for this login as appropriate. This is BB (buffer-to-buffer) credit for Flogs and EE (end-to-end) credit for PLOGIs. df_sz The default frame size for this login. cos Class of Services supported. This can be a combination of the following bits: 4 Class 2 is supported. 8 Class 3 is supported. logout time Timestamp when the device is logged out from a port. Further information about each login is displayed after these columns, including the Port ID of the well-known address or N_Port that was the target of the PLOGI, if applicable. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. This command is not applicable to embedded FCoE ports. Use fcoeLoginShow. Brocade Fabric OS Command Reference 795 53-1004112-02