Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1004

Command History Usage Information This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.6(0.0) Introduced on the C9010. Introduced on the Z9500. By default, iSCSI flows are assigned to dot1p priority 4. iscsi enable Globally enable iSCSI optimization. C9000 Series Syntax Parameters iscsi enable To disable iSCSI optimization, use the no iscsi enable command. enable Enter the keyword enable to enable the iSCSI optimization feature. Defaults Disabled. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.6(0.0) Introduced on the C9010. Introduced on the Z9500. iscsi priority-bits Configure the priority bitmap that advertises in the iSCSI application TLVs. C9000 Series Syntax iscsi priority-bits To remove the configured priority bitmap, use the no iscsi priority-bits command. Defaults 4 (0x10 in the bitmap) Command Modes PROTOCOL LLDP (only on the global, not on the interface) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is the Dell Networking OS version history for this command. 1004 iSCSI Optimization