Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 80

Usage Information Example (PE Console) Version 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the Z9500. Introduced on the S4820T. Changed the default from Force10 to FTOS. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. The host name is used in the command-line prompt. To configure a desired PE console hostname, use the hostname command from a PE console. To unconfigure the hostname configured for the PE console, use no hostname. If no hostnames are configured, the system. uses the default hostname, "Dell". Dell#hostname PE1 PE1# ip ftp password Specify a password for outgoing FTP connections. C9000 Series Syntax Parameters ip ftp password [encryption-type] password To remove a password and return to the default setting, use the no ip ftp password [password] command. encryption-type password (OPTIONAL) Enter one of the following numbers: ● 0 (zero) for an unecrypted (clear text) password ● 7 (seven) for a hidden text password Enter a string up to 40 characters as the password. Defaults Not configured. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. 80 Control and Monitoring