Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1608

sflow sample-rate (Interface) Change the interface default sampling rate. C9000 Series Syntax Parameters sflow sample-rate value To return to the default sampling rate, use the no sflow sample-rate command. value Enter the sampling rate value. For the C-Series and S-Series, the range is from 256 to 8388608 packets. Enter values in powers of 2 only; for example, 4096, 8192, 16384, etc. The default is 32768 packets. Defaults The Global default sampling. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.7(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 8.1.1.0 7.7.1.0 7.6.1.0 6.2.1.1 Introduced on the C9010. Introduced on the S6000-ON. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on S-Series Stacking. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Related Commands This command changes the sampling rate for an interface. By default, the sampling rate of an interface is set to the same value as the current global default sampling rate if port is operationally down, otherwise sampling rate changes based on port line speed. If the value entered is not a correct power of 2, the command generates an error message with the previous and next power-of-2 value. Select one of these two number and re-enter the command. sflow sample-rate (Global) - changes the sampling rate globally. show sflow Display the current sFlow configuration. Syntax Parameters show sflow [interface] interface (OPTIONAL) Enter the following keywords and slot/port or number information: ● For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet then the slot/port information. 1608 sFlow