Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1088

34 Multicast Listener Discovery Protocol The Multicast Listener Discovery (MLD) protocol is used by IPv6 routers to discover multicast listeners on a directly attached link. Similar to the Internet Group Management Protocol (IGMP), which handles multicast group memberships in IPv4 networks, MLD is used for multicast management on IPv6 networks. Topics: • clear ipv6 mld groups • debug ipv6 mld • ipv6 mld explicit-tracking • ipv6 mld last-member-query-interval • ipv6 mld query-interval • ipv6 mld query-max-resp-time • ipv6 mld version • show ipv6 mld groups • show ipv6 mld interface • MLD Snooping clear ipv6 mld groups Clear entries from the group cache table. Syntax Parameters clear ipv6 mld [vrf vrf-name] groups [interface | group-address] vrf vrf-name interface (Optional) Enter the keyword vrf followed by the name of the VRF. Enter the following keywords and slot/port or number information: ● For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. ● For a Port Channel interface, enter the keywords port-channel then a number. ● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. ● For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. group-address (OPTIONAL) Enter the group address in the following format: x:x:x:x::x. The :: notation specifies successive hexadecimal fields of zero. Defaults None. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.11(3.0) Introduced on the S3048-ON, S4048-ON, S4048T-ON, S6000-ON, S6010-ON, S6100-ON, Z9100-ON, S3100, and C9010. 1088 Multicast Listener Discovery Protocol