Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 372

Command History Usage Information Version 9.10(0.0) 9.9(0.0) 9.2(1.0) 8.2.1.0 7.4.1.0 Description Introduced the all keyword on the S4810, S4820, S4048-ON, S3048-ON, S3100 series, S6010-ON, S4040T-ON, S5000, S6000, S6000-ON, S6100-ON, Z9100- ON, and Z9500. Introduced on the C9010. Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced If you configure the set ipv6 next-hop command in ROUTE-MAP mode, its configuration takes precedence over the neighbor next-hop-self command. If you do not use the all keyword, the next hop of only eBGP-learned routes is updated by the route reflector. If you use the all keyword, the next hop of both eBGP- and iBGP-learned routes are updated by the route reflector. neighbor password Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors. C9000 Series Syntax Parameters neighbor {ip-address | peer-group-name} password [encryption-type] password To delete a password, use the no neighbor {ip-address | peer-group-name} password command. ip-address Enter the IP address of the router to be included in the peer group. peer-group-name Enter the name of a configured peer group. encryption-type (OPTIONAL) Enter 7 as the encryption type for the password entered. 7 means that the password is encrypted and hidden. password Enter a text string up to 80 characters long. The first character of the password must be a letter. You cannot use spaces in the password. Defaults Not configured. Command Modes ROUTER BGP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. 372 Border Gateway Protocol