Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1455

50 Rapid Spanning Tree Protocol (RSTP) The Dell Networking operating software implementation of rapid spanning tree protocol (RSTP) is based on the IEEE 802.1w standard spanning-tree protocol. The RSTP algorithm configures connectivity throughout a bridged local area network (LAN) that is comprised of LANs interconnected by bridges. Topics: • bridge-priority • debug spanning-tree rstp • description • disable • forward-delay • hello-time • max-age • protocol spanning-tree rstp • show config • show spanning-tree rstp • spanning-tree rstp • tc-flush-standard bridge-priority Set the bridge priority for RSTP. C9000 Series Syntax Parameters bridge-priority priority-value To return to the default value, use the no bridge-priority command. priority-value Enter a number as the bridge priority value in increments of 4096. The range is from 0 to 61440. The default is 32768. Defaults 32768 Command Modes CONFIGURATION RSTP (conf-rstp) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Rapid Spanning Tree Protocol (RSTP) 1455