Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1243

ipv6 ospf priority To determine the Designated Router for the OSPFv3 network, set the priority of the interface. C9000 Series Syntax Parameters ipv6 ospf priority number To return to the default time interval, use the no ipv6 ospf priority command. number Enter the number as the priority. The range is from 1 to 255. Defaults 1 Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 9.1.(0.0) 8.3.19.0 7.8.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4810 and Z9000. Introduced on the S4820T. Added support for the C-Series. Introduced on the E-Series. Usage Information Setting a priority of 0 makes the router ineligible for election as a Designated Router or Backup Designated Router. Use this command for interfaces connected to multi-access networks, not point-to-point networks. ipv6 router ospf Enable OSPF for IPv6 router configuration. C9000 Series Syntax Parameters ipv6 router ospf process-id [vrf vrf-name] To exit OSPF for IPv6, use the no ipv6 router ospf process-id command. process-id vrf vrf-name Enter the process identification number. The range is from 1 to 65535. (Optional) Enter the keyword vrf and the name of the VRF to install IPv6 routes in that VRF. Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Open Shortest Path First (OSPFv2 and OSPFv3) 1243