Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 896

session-key Specify the session keys used in the crypto policy entry. C9000 Series Syntax Parameters session-key {inbound | outbound} {ah spi hex-key-string | esp spi encrypt hex-key-string auth hex-key-string To delete the session key information from the crypto policy, use the no session-key {inbound | outbound} {ah | esp} command. name inbound outbound ah esp spi hex-key-string encrypt auth Enter the name for the transform set. Specify the inbound session key for IPSec. Specify the outbound session key for IPSec. Use the AH protocol when you select the AH transform set in the crypto policy. Use the ESP protocol when you select the ESP transform set in the crypto policy. Enter the security parameter index number. Enter the session key in hex format (a string of 8, 16, or 20 bytes). For DES algorithms, specify at least 16 bytes per key. For SHA algorithms, specify at least 20 bytes per key. Indicates the ESP encryption transform set key string. Indicates the ESP authentication transform set key string. Defaults none Command Modes CONF-CRYPTO-POLICY Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 9.2(0.0) Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000, S4810, and S4820T. Usage Information ● This command is only available in the ipsec-manual model. ● The key information entry is associated with the global method for enabling clear text or encrypted display in the running config. show crypto ipsec transform-set Display the transform set configuration. C9000 Series Syntax Parameters show crypto ipsec transform-set name name Enter the name of the transform set. 896 Internet Protocol Security (IPSec)