Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 286

Command History Related Commands This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.11.1 8.3.7.0 8.1.1.0 7.7.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced. route-map - enables a route map. match as-path To match routes that have a certain AS number in their BGP path, configure a filter. C9000 Series Syntax Parameters match as-path as-path-name To delete a match AS path filter, use the no match as-path as-path-name command. as-path-name Enter the name of an established AS-PATH ACL, up to 140 characters. Defaults Not configured. Command Modes ROUTE-MAP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands set as-path - adds information to the BGP AS_PATH attribute. 286 Access Control Lists (ACL)