Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1495

Usage Information Related Commands Version 6.2.1.1 Description Introduced on the E-Series. Although the passive interface does not send or receive routing updates, the network on that interface still includes in RIP updates sent using other interfaces. neighbor - enables RIP for a specified network. network - defines a neighbor. redistribute Redistribute information from other routing instances. C9000 Series Syntax Parameters redistribute {connected | static} To disable redistribution, use the no redistribute {connected | static} command. connected static Enter the keyword connected to specify that information from active routes on interfaces is redistributed. Enter the keyword static to specify that information from static routes is redistributed. Defaults Not configured. Command Modes ROUTER RIP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 6.2.1.1 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Related Commands To redistribute the default route (0.0.0.0/0), configure the default-information originate command. default-information originate - generates a default route for RIP traffic. Routing Information Protocol (RIP) 1495