Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 71

disable Return to EXEC mode. C9000 Series Syntax Parameters disable [level] From a port extender (PE) console, use disable [level] to return to EXEC mode. level (OPTIONAL) Enter a number for a privilege level of the Dell Networking OS. The range is from 0 to 15. The default is 1. Defaults 1 Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Introduced on the C9010 and C1048P. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information You can also use the disable command from port extender(PE) console to turns off access to the privileged mode commands. do Allow the execution of most EXEC-level commands from all CONFIGURATION levels without returning to the EXEC level. C9000 Series Syntax Parameters do command command Enter an EXEC-level command. Defaults none Command Modes ● CONFIGURATION ● INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Control and Monitoring 71