Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 300

set local-preference To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, configure a filter. C9000 Series Syntax Parameters set local-preference value To delete a BGP LOCAL_PREF attribute, use the no set local-preference command. value Enter a number as the LOCAL_PREF attribute value. The range is from 0 to 4294967295. Defaults Not configured. Command Modes ROUTE-MAP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Related Commands The set local-preference command changes the LOCAL_PREF attribute for routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgp default localpreference command. bgp default local-preference - changes the default LOCAL_PREF attribute for all routes. set metric To assign a new metric to redistributed routes, configure a filter. C9000 Series Syntax Parameters set metric [+ | -] metric-value To delete a setting, enter no set metric. + metric-value (OPTIONAL) Enter + to add a metric-value to the redistributed routes. (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes. Enter a number as the new metric value. The range is from zero (0) to 4294967295. 300 Access Control Lists (ACL)