Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1496

redistribute isis Redistribute routing information from an IS-IS instance. C9000 Series Syntax Parameters redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metricvalue] [route-map map-name] To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value] [route-map map-name] command. tag level-1 level-1-2 level-2 metric metricvalue route-map mapname (OPTIONAL) Enter the name of the IS-IS routing process. (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1 routes. (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1 and Level-2 routes. (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2 routes. (OPTIONAL) Enter the keyword metric then a number as the metric value. The range is from 0 to 16. (OPTIONAL) Enter the keywords route-map then the name of a configured route map. Defaults Not configured. Command Modes ROUTER RIP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 6.2.1.1 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. redistribute ospf Redistribute routing information from an OSPF process. C9000 Series Syntax redistribute ospf process-id [match external {1 | 2} | match internal | metric metric-value] [route-map map-name] To disable redistribution, use the no redistribute ospf process-id [match external {1 | 2} | match internal | metric metric-value] [route-map map-name] command. 1496 Routing Information Protocol (RIP)