Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 935

Example Related Commands Field Type Address Description Displays IP as the type of entry. Displays the IP addresses assigned to the host. Dell#show hosts Default domain is not set Name/address lookup uses static mappings Name servers are not set Host Flags TTL Type Address ks (perm, OK) - IP 2.2.2.2 4200-1 (perm, OK) - IP 192.68.69.2 1230-3 (perm, OK) - IP 192.68.99.2 ZZr (perm, OK) - IP 192.71.18.2 Z10-3 (perm, OK) - IP 192.71.23.1 Dell# traceroute - views the DNS resolution. ip host - configures a host. show ip cam linecard View CAM entries for a port pipe on a line card.. C9000 Series Syntax Parameters show ip cam linecard number port-set pipe-number [ip-address mask [longerprefixes] | index index-number | summary | vrf vrf instance] number pipe-number ip-address mask [longer-prefix] index indexnumber summary vrf instance Enter the number of the line card. Enter the number of the line card's port-pipe. The range is from 0 to 1. (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. (OPTIONAL) Enter the keyword index then the CAM index number. The range depends on CAM size. (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number of routes that can be entered into the CAM. (OPTIONAL) E-Series Only: Enter the keyword vrf then the VRF instance name to show CAM information as it applies to that VRF instance. Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. IPv4 Routing 935