Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1259

Command History Example The PE unit goes offline and reboots automatically after the test is completed. Once the test is finished, the diag report is generated, and it is stored in the PE flash. To view the diag report, use the show diag pe pe-id stack-unit unit-number command from C9000 system. The show diag pe command uploads the TestReport from the PE to the C9000. The filename of the TestReport is:TestReport-SU-Stack-Unit-Number-PE-pe-idYear_Month_Day_Unique-Tag.txt, where SU identifies the PE stack-unit on which the offline diag test was run, Year_Month_Day is a timestamp to identify when the offline diag test was run for that unit, and the Unique Tag is to identify that specific diag test. Diag test reports on PE are not overwritten. Offline diag test reports for PE are stored in the following directory: flash:// default_diag_report_dir. To view the test report, use the show file flash://filename command. This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.3.1.0 7.7.1.0 Introduced on C9010 and C1048P. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced the verbose option. Introduced on the S-Series. Dell#offline stack-unit 3 Warning - offline of unit will bring down all the protocols and the unit will be operationally down, except for running Diagnostics. Please make sure that stacking is not configured for Diagnostics execution. If configured, the unit roles may change. The unit will become standalone once diags are executed. Also reboot/online command is necessary for normal operation after the offline command is issued. Proceed with Offline [confirm yes/no]:yes Dell#diag stack-unit 3 level0 Warning - diagnostic execution will cause multiple link flaps on the peer side - advisable to shut directly connected ports Proceed with Diags [confirm yes/no]: yes Related Commands ● offline ● online offline Place the PE stack-unit in the offline state to run the diagnostics tests. C9000 Series Syntax offline stack-unit unit-number PE Console Commands 1259