Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1434

Command History Usage Information Example Version 9.9(0.0) 9.7(0.0) 9.3(0.0) Description Introduced on the C9010. Introduced on the S6000-ON. Introduced on the S6000 platform You can configure all the data queues. For S6000, you can configure queues 0-7. The following table describes the mapping between the threshold weight of the shared buffer on the queue and the percentage of available shared buffer that is used by the queue for each of the corresponding threshold weights of the shared buffer: sharedthresholdweight on the queue % of available shared buffer that can be consumed by the queue. 0 No dynamic sharing; shared buffer = 0. 1 0.77% 2 1.54% 3 3.03% 4 5.88% 5 11.11% 6 20% 7 33.33% 8 50% 9 66.67% 10 80% 11 88.89% Dell(conf-if-te-0/8)#service-class buffer shared-threshold-weight queue5 4 queue7 6 service-policy input Apply an input policy map to the selected interface. C9000 Series Syntax Parameters service-policy input policy-map-name [layer2] To remove the input policy map from the interface, use the no service-policy input policymap-name [layer2] command. policy-map-name Enter the name for the policy map in character format (32 characters maximum). You can identify an existing policy map or name one that does not yet exist. 1434 Quality of Service (QoS)