Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 152

Parameters all pe pe-id Enter the keyword all to view all components. Enter the keyword pe and the port extender (PE) ID to view show version output for a specific PE. The PE ID range is from 0 to 255. NOTE: The pe option is only available when the extended bridge feature is enabled. . Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 9.0.0.0 8.3.19.0 8.3.12.0 7.6.1.0 7.5.1.0 E-Series Introduced on the C9010 and C1048P. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Introduced on the S-Series Introduced on the C-Series. Original command. Usage Information The following table lists the information shown in the example. Lines Beginning With Lines Beginning With Dell Force10 Network... Dell Force10 Operating... Dell Force10 Application... Copyright (c)... Build Time... Build Path... Dell Force10 uptime is... System image... Chassis Type: Control Processor:... Route Processor 1:... Route Processor 2:... 128K bytes... Name of the operating system OS version number Software version Copyright information Software build's date stamp Location of the software build files loaded on the system Amount of time the system has been up Image file name Chassis type (for example, E1200, E600, E600i, E300, C300, C150, S25, S50, S55, S60, S4810) Control processor information and amount of memory on processor Route processor 1 information and the amount of memory on that processor Route processor 2 information and the amount of memory on that processor Amount and type of memory on system 152 Control and Monitoring