Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1206

Usage Information Example The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.4(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Introduced on the C9010. Added support for VRF on all platforms (Except MXL and STOMP). Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. The following describes the show ip ospf process-id database router command shown in the following example. Item Description LS Age Options Displays the LSA age. Displays the optional capabilities available on router. The following options can be found in this item: ● TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. ● DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. ● E or No E is displayed on whether the originating router can accept AS External LSAs. LS Type Link State ID Advertising Router LS Seq Number Checksum Length Number of Links Link connected to: (Link ID) (Link Data) Number of TOS Metric TOS 0 Metric Displays the LSA type. Displays the Link State ID. Identifies the router ID of the LSA's originating router. Displays the link state sequence number. This number detects duplicate or old LSAs. Displays the Fletcher checksum of an LSA's complete contents. Displays the length in bytes of the LSA. Displays the number of active links to the type of router (Area Border Router or AS Boundary Router) listed in the previous line. Identifies the type of network to which the router is connected. Identifies the link type and address. Identifies the router interface address. Lists the number of TOS metrics. Lists the number of TOS 0 metrics. Dell#show ip ospf 100 database router OSPF Router with ID (1.1.1.10) (Process ID 100) 1206 Open Shortest Path First (OSPFv2 and OSPFv3)