Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1554

dot1x quiet-period Set the number of seconds that the authenticator remains quiet after a failed authentication with a client. C9000 Series Syntax Parameters dot1x quiet-period seconds To disable quiet time, use the no dot1x quiet-time command. seconds Enter the number of seconds. The range is from 1 to 65535. The default is 30. Defaults 30 seconds Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Introduced on the E-Series. dot1x reauthentication Enable periodic re-authentication of the client. C9000 Series Syntax Parameters dot1x reauthentication [interval seconds] To disable periodic re-authentication, use the no dot1x reauthentication command. interval seconds (Optional) Enter the keyword interval then the interval time, in seconds, after which re-authentication is initiated. The range is from 1 to 31536000 (1 year). The default is3600 (1 hour). Defaults 3600 seconds (1 hour) Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) Introduced on the C9010. Introduced on the Z9500. 1554 Security