Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1558

Example Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.5.1.0 8.3.7.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the C-Series, S-Series, and E-Series. Dell#show dot1x int Te 2/32 802.1x information on Te 2/32: Dot1x Status: Enable Port Control: AUTO Port Auth Status: UNAUTHORIZED Re-Authentication: Disable Untagged VLAN id: None Guest VLAN: Enable Guest VLAN id: 10 Auth-Fail VLAN: Enable Auth-Fail VLAN id: 11 Auth-Fail Max-Attempts: 3 Tx Period: 30 seconds Quiet Period: 60 seconds ReAuth Max: 2 Supplicant Timeout: 30 seconds Server Timeout: 30 seconds Re-Auth Interval: 3600 seconds Max-EAP-Req: 2 Auth Type: SINGLE_HOST Auth PAE State: Initialize Backend State: Initialize Dell# SSH Server and SCP Commands The Dell Networking OS supports secure shell (SSH) protocol versions 1.5 and 2.0. SSH is a protocol for secure remote login over an insecure network. SSH sessions are encrypted and use authentication. crypto cert generate Generates a default key and a self-signed certificate. This command replaces the existing certificate with a new certificate. C9000 Series Syntax Parameters crypto cert generate {cert-file file-name key-file file-name} [cname common-name] [country country-name] [email email-id] [length key-length] [locality locality-name] [organization organization-name] [orgunit organization-unit-name] [state state-name] [validity days] cert-file filename Enter the keyword cert-file then the filename of the certificate to be generated. key-file file-name Enter the keyword key-file then the key filename to be generated. 1558 Security