Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1674

Te 0/2 0 Te 0/3 0 LIS Loopguard EDS (Shut) Bpduguard spanning-tree 0 Assigns a Layer 2 interface to STP instance 0 and configures a port cost or port priority, or enables loop guard, root guard, or the Portfast feature on the interface. C9000 Series Syntax Parameters spanning-tree stp-id {cost cost | | portfast [bpduguard [shutdown-onviolation]] | priority priority} To disable Spanning Tree group on an interface, use the no spanning-tree stp-id {cost cost | portfast [bpduguard [shutdown-on-violation]] | priority priority} command. stp-id cost cost Enter the STP instance ID. The range is 0. Enter the keyword cost then a number as the cost. The range is from 1 to 65535. The defaults are: ● 10-Gigabit Ethernet interface = 2. ● Port Channel interface with 10-Gigabit Ethernet = 1. portfast [bpduguard [shutdown-onviol ation]] priority priority Enter the keyword portfast to enable Portfast to move the interface into Forwarding mode immediately after the root fails. Enter the optional keyword bpduguard to disable the port when it receives a BPDU. Enter the optional keyword shutdown-on-violation to hardware disable an interface when a BPDU is received and the port is disabled. Enter keyword priority then a number as the priority. The range is from zero (0) to 15. The default is 8. Defaults cost = depends on the interface type; priority = 8 Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.10.1 8.4.2.1 8.3.7.0 8.2.1.0 7.7.1.0 7.5.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced the loopguard and rootguard options on the S4810. Introduced the loopguard and rootguard options on the E-Series TeraScale, C-Series, and S-Series. Introduced on the S4810. Introduced the shutdown-on-violation option. Introduced on the S-Series. Introduced on the C-Series. 1674 Spanning Tree Protocol (STP)