Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1497

Parameters process-id Enter a number that corresponds to the OSPF process ID to redistribute. The range is from 1 to 65355. match external {1 (OPTIONAL) Enter the keywords match external then the numbers 1 or 2 to | 2} indicated that external 1 routes or external 2 routes should be redistributed. match internal (OPTIONAL) Enter the keywords match internal to indicate that internal routes should be redistributed. metric metricvalue (OPTIONAL) Enter the keyword metric then a number as the metric value. The range is from 0 to 16. route-map map- (OPTIONAL) Enter the keywords route-map then the name of a configured route name map. Defaults Not configured. Command Modes ROUTER RIP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 6.2.1.1 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. router rip To configure and enable RIP, enter ROUTER RIP mode. C9000 Series Syntax router rip To disable RIP, use the no router rip command. Defaults Disabled. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Routing Information Protocol (RIP) 1497