Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 937

vrf A.B.C.D. summary Displays the fib entries for the mentioned vrf-id. Otherwise, vrf displays the default vrf entries. Displays the fib entry for the mentioned prefix. Displays the fib summary. Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.7.0 8.1.1.0 7.9.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced VRF on the E-Series. Introduced on the C-Series. Introduced on the E-Series. Example Dell>show ip fib linecard 2 Destination Gateway First-Hop Addr Port VId EC 1.1.32.140/32 via 1.1.32.140, PeGigE PE‐ID/Slot/Port 1.1.32.140 00:00:00:00:1f:8a PeGigE PE‐ID/Slot/Port 200 0 Mac- show ip flow Show how a Layer 3 packet is forwarded when it arrives at a particular interface. C9000 Series Syntax Parameters show ip flow interface interface {source-ip address destination-ip address} {protocol number [tcp | udp]} {src-port number destination-port number} interface interface Enter the keyword interface then one of the following interface keywords. ● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. ● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. source-ip address destination-ip address protocol number [tcp | udp] Enter the keywords source-ip then the IP source address in IP address format. Enter the keywords destination-ip then the IP destination address in IP address format. Enter the keyword protocol then one of the protocol type keywords: tcp, udp, or protocol number The protocol number range is from 0 to 255. . IPv4 Routing 937