Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 614

pe peid Enter the keyword pe and the port extender (PE) ID to display the counters for a specified PE. The PE ID ranges is from 0 to 255. NOTE: The pe option is only visible when the extended bridge feature is enabled. stack-unit unitnumber port set portpipe Enter the keyword stack-unit and unit number to display the counters for the specified stack-unit. The stack unit range is from 0 to 7. Enter the keyword port-set and port-pipe number. The port-set number is 0. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 Introduced on the C9010. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Example Dell# show hardware system-flow pe 1 stack-unit 0 port-set 0 ######### FP Entry for IPC traffic destined to stack_unit 4 PE CPU####### EID 0x000003fb: gid=0xd, slice=11, slice_idx=0x5, part =0 prio=0x3fb,flags=0x10602,Installed, Enabled tcam: color_indep=1024, Stage InPorts DATA=0x0000000000000000000000000000000000000000000000c000000000000 MASK=0x0000000000000000000000000000000000000000000000dffffffffffff HiGig Offset: 320 Width: 1 DATA=0x00000000 MASK=0x00000001 DstIp Offset: 105 Width: 32 DATA=0x7f080141 MASK=0xffffffff OuterVlanId Offset: 8 Width: 12 DATA=0x00000ffc MASK=0x00000fff action={act=CosQNew, param0=8(0x8), param1=0(0), param2=0(0), param3=0(0)} action={act=RedirectPort, param0=4(0x4), param1=0(0), param2=0(0), param3=0(0)} policer= statistics={stat id 58 slice = 0 idx=15 entries=1}{Packets} ######### FP Entry for IPC traffic destined to stack_unit 5 PE CPU####### EID 0x000003fa: gid=0xd, slice=11, slice_idx=0x6, part =0 prio=0x3fa, flags=0x10602, Installed, Enabled tcam: color_indep=1024, Stage InPorts DATA=0x0000000000000000000000000000000000000000000000c000000000000 614 Debugging and Diagnostics