Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 907

Usage Information Related Commands The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 9.0.0.0 8.3.7.0 8.3.19.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4810. Introduced on the S4820T. To clear Layer 3 CAM inconsistencies, use this command. CAUTION: Executing this command causes traffic disruption. show ip fib linecard - shows FIB entries on a specified stack-unit. clear ip route Clear one or all routes in the routing table. C9000 Series Syntax Parameters clear ip route {* | ip-address mask} * ip-address mask Enter an asterisk (*) to clear all learned IP routes. Enter a specific IP address and mask in dotted decimal format to clear that IP address from the routing table. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.9.1.0 7.6.1.0 7.5.1.0 6.2.1.1 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced VRF on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands ● ip route - assigns an IP route to the switch. ● show ip route - views the routing table ● show ip route summary - views a summary of the routing table. IPv4 Routing 907