Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1522

enable restricted Allows Dell Networking technical support to access restricted commands. C9000 Series Syntax Parameters Defaults Command History Usage Information enable restricted [encryption-type] password To disallow access to restricted commands, use the no enable restricted command. encryption-type password (OPTIONAL) Enter the number 7 as the encryption type. Enter 7 followed a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Networking router. Use this parameter only with a password that you copied from the show running-config file of another Dell Networking router. Enter a text string, up to 32 characters long, as the clear text password. Not configured. This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Only Dell Networking Technical Support staff use this command. enable secret Change the password for the enable command. C9000 Series Syntax Parameters enable secret [level level] [encryption-type] password To delete a password, use the no enable secret [encryption-type] password [level level] command. level level encryption-type (OPTIONAL) Enter the keyword level then a number as the level of access. The range is from 1 to 15. (OPTIONAL) Enter the number 5 or 0 as the encryption type. 1522 Security