Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1417

Usage Information Related Commands Version 8.3.7.0 8.2.1.0 7.6.1.0 6.1.1.1 Description Introduced on the S4810. Added the kbps option on the C-Series, E-Series, and S-Series. Introduced on the S-Series and C-Series. Introduced on the E-Series. If traffic is shaped between 64 and 1000 Kbs, for some values, the shaped rate is much less than the value configured. rate-shape - shapes traffic output as part of the designated policy. Policy-Based QoS Commands Policy-based traffic classification is handled with class maps. These maps classify unicast traffic into one of four classes. The system allows you to match multiple class maps and specify multiple match criteria. Policy-based QoS is not supported on logical interfaces, such as port-channels, VLANs, or loopbacks. bandwidth-percentage Assign a percentage of weight to the class/queue. C9000 Series Syntax Parameters bandwidth-percentage percentage To remove the bandwidth percentage, use the no bandwidth-percentage command. percentage Enter the percentage assignment of weight to the class/queue. The range is from 1 to 100% (granularity 1%). Defaults none Command Modes CONFIGURATION (conf-qos-policy-out) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.1.9.0 8.3.11.1 8.3.7.0 6.2.1.1 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Usage Information Related Commands The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages given to all eight classes exceeds 100%, the bandwidth percentage automatically scales down to 100%. qos-policy-output - creates a QoS output policy. Quality of Service (QoS) 1417