Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1414

show qos dot1p-queue-mapping Displays the dot1p priority to queue mapping on the switch. C9000 Series Syntax Defaults show qos dot1p-queue-mapping ● dot1p Priority: 0 1 2 3 4 5 6 7 ● Queue: 0 0 0 1 2 3 3 3 Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.16.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module. Related Commands service-class dot1p-mapping - Identifies the class map. Per-Port QoS Commands Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis. dot1p-priority Assign a value to the IEEE 802.1p bits on the traffic this interface receives. C9000 Series Syntax Parameters dot1p-priority priority-value To delete the IEEE 802.1p configuration on the interface, use the no dot1p-priority command. priority-value Enter a value from 0 to 7. dot1p Queue Number 0 1 1 0 2 2 3 3 4 4 5 5 1414 Quality of Service (QoS)