Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 307

ip as-path access-list Enter AS-PATH ACL mode and configure an access control list based on the BGP AS_PATH attribute. C9000 Series Syntax Parameters ip as-path access-list as-path-name as-path-name Enter the access-list name, up to 140 characters. Defaults Not configured. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.8.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the E-Series. Usage Information Example To apply the AS-PATH ACL to BGP routes, use the match as-path or neighbor filter-list commands. Dell(conf)#ip as-path access-list TestPath Dell(config-as-path)# Related Commands match as-path - matches on routes contain a specific AS-PATH. neighbor filter-list - configures filter based on AS-PATH information. show ip as-path-access-lists Display the all AS-PATH access lists configured on the E-Series. C9000 Series Syntax show ip as-path-access-lists Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Access Control Lists (ACL) 307