Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 957

clear counters ipv6 access-group Erase all counters maintained for the IPv6 access lists. C9000 Series Syntax Parameters clear counters ipv6 access-group [access-list-name] access-list-name (OPTIONAL) Enter the name of a configured access-list, up to 140 characters. Command Modes ● EXEC ● EXEC Privilege Command History Version 9.9(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.4.2.1 8.2.1.0 7.8.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the E-Series TeraScale. Introduced on the C-Series. Introduced on the E-Series TeraScale Added the monitor option. deny (for IPv6 ACLs) Configure a filter that drops IPv6 packets matching the filter criteria. C9000 Series Syntax Parameters deny {ipv6-protocol-number | icmp | ipv6 | tcp | udp} [count [byte]] [dscp value] [order] [fragments] [log [interval minutes] [threshold-in-msgs [count]] [monitor] To remove this filter, you have two choices: ● Use the no seq sequence-number command syntax if you know the filter's sequence number ● Use the no deny {ipv6-protocol-number | icmp | ipv6 | tcp | udp} command log threshold-in msgs count interval minutes (OPTIONAL) Enter the keyword log to enable the triggering of ACL log messages. (OPTIONAL) Enter the threshold-in-msgs keyword followed by a value to indicate the maximum number of ACL logs that can be generated, exceeding which the generation of ACL logs is terminated. with the seq, permit, or deny commands. The threshold range is from 1 to 100. (OPTIONAL) Enter the keyword interval followed by the time period in minutes at which ACL logs must be generated. The time interval range is from 1 to 10 minutes. IPv6 Access Control Lists (IPv6 ACLs) 957