Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 322

Related Commands Statistics: Number of packets received from neighbor: 376 Number of packets sent to neighbor: 314 Number of state changes: 2 Number of messages from IFA about port state change: 0 Number of messages communicated b/w Manager and Agent: 6 Dell# bfd all-neighbors - establishes BFD sessions with all neighbors discovered by the IS-IS protocol or OSPF protocol out of all interfaces. vrrp bfd Establish a BFD session with VRRP neighbors. C9000 Series Syntax Parameters vrrp bfd {all-neighbors | neighbor ip-address} [interval interval min_rx min_rx multiplier value role {active | passive}] To undo your VRRP BFD configuration, use the no vrrp bfd {all-neighbors | neighbor ipaddress } [interval interval min_rx min_rx multiplier value role {active | passive}] command. all-neighbors neighbor ipaddress interval milliseconds min_rx milliseconds multiplier role [active | passive] Establish BFD sessions with all BFD neighbors on an interface. Enter the IP address of the BFD neighbor. (OPTIONAL) Enter the keyword interval to specify non-default BFD session parameters beginning with the transmission interval. The range is 50 to 1000. The default is 200. Enter the keyword min_rx to specify the minimum rate at which the local system would like to receive control packets from the remote system. The range is 50 to 1000. The default is 200. Enter the keyword multiplier to specify the number of packets that must be missed in order to declare a session down. The range is 3 to 50. The default is 3. Enter the role that the local system assumes: ● Active-The active system initiates the BFD session. Both systems can be active for the same session. ● Passive-The passive system does not initiate a session. It only responds to a request for session initialization from the active system. The default is Active. Defaults See Parameters. Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. 322 Bidirectional Forwarding Detection (BFD)