Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1200

Usage Information Example Version 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Added support for Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. The following describes the show ip ospf process-id database network command shown in the following example. Field Description LS Age Options Displays the LSA's age. Displays the optional capabilities available on router. The following options can be found in this item: ● TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. ● DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. ● E or No E is displayed on whether the originating router can accept AS External LSAs. LS Type Link State ID Advertising Router Checksum Length Network Mask Attached Router Displays the LSA's type. Displays the Link State ID. Identifies the router ID of the LSA's originating router. Identifies the link state sequence number. This number enables you to identify old or duplicate LSAs. Displays the Fletcher checksum of an LSA's complete contents. Displays the length in bytes of the LSA. Identifies the IP address of routers attached to the network. Dell#show ip ospf 1 data network OSPF Router with ID (20.20.20.5) (Process ID 1) Network (Area 0.0.0.0) LS age: 1372 Options: (No TOS-capability, DC, E) LS type: Network Link State ID: 202.10.10.2 Advertising Router: 20.20.20.8 LS Seq Number: 0x80000006 Checksum: 0xa35 Length: 36 Network Mask: /24 Attached Router: 20.20.20.8 Attached Router: 20.20.20.9 Attached Router: 20.20.20.7 Network (Area 0.0.0.1) LS age: 252 Options: (TOS-capability, No DC, E) LS type: Network Link State ID: 192.10.10.2 Advertising Router: 192.10.10.2 LS Seq Number: 0x80000007 Checksum: 0x4309 Length: 36 1200 Open Shortest Path First (OSPFv2 and OSPFv3)