Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1557

dot1x tx-period Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator PAE. C9000 Series Syntax Parameters dot1x tx-period seconds To return to the default, use the no dot1x tx-period command. seconds Enter the interval time, in seconds, that EAPOL PDUs are transmitted. The range is from 1 to 31536000 (1 year). The default is 30. Defaults 30 seconds Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Introduced on the E-Series. show dot1x interface Display the 802.1X information on an interface. C9000 Series Syntax Parameters show dot1x interface interface interface Enter one of the following keywords and slot/port or number information: ● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. ● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. Defaults none Command Modes ● EXEC ● EXEC privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Security 1557