Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 701

redundancy primary Set an RPM as the primary RPM. C9000 Series Syntax Parameters redundancy primary [rpm0 | rpm1] To delete a configuration, use the no redundancy primary command. rpm0 rpm1 Enter the keyword rpm0 to set the RPM in slot R0 as the primary RPM. Enter the keyword rpm1 to set the RPM in slot R1 as the primary RPM. Default The RPM in slot R0 is the Primary RPM. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 8.3.19.0 8.3.12.0 8.1.1.0 7.5.1.0 7.6.1.0 Introduced on the C9010. Introduced on the S4820T. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the C-Series. Introduced on the E-Series. redundancy reset-counter Reset failover counter and timestamp information displayed in the show redundancy command output. C9000 Series Syntax Parameters redundancy reset-counter pe pe-id pe pe-id Enter the keyword pe and the port extender ID to reset the counter. Range is from 0 to 255. Default Not configured. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 8.3.19.0 8.3.11.1 Introduced on the C9010. Introduced on the S4820T. Introduced on the Z9000. High Availability (HA) 701