Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1082

vlt (OPTIONAL) Enter the keyword vlt to view multicast routes with a spanned incoming interface. Enter a multicast group address in dotted decimal format (A.B.C.D) to limit the information displayed to the multicast routes for a specified multicast group and optionally a source multicast address in dotted decimal format (A.B.C.D) to limit the information displayed for a specified multicast source. Enter the keyword count to display the total number of multicast routes with the spanned IIF. Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.) 9.0.2.0 9.2.(0.0) 8.4.1.1 8.3.19.0 8.3.7.0 7.6.1.0 7.5.1.0 E-Series legacy command Introduced on the C9010. Introduced on the S6000. Added support for keyword vlt to the Z9000, S4810, and S4820T. Support for the keyword snooping and the optional vlan vlan-id, groupaddress, and source-address parameters were added on E-Series ExaScale. Introduced on the S4820T. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Example (Static) Dell#show ip mroute static Mroute: 23.23.23.0/24, interface: Lo 2 Protocol: static, distance: 0, route-map: none, last change: 00:00:23 Example (Snooping) Dell#show ip mroute snooping IPv4 Multicast Snooping Table (*, 224.0.0.0), uptime 17:46:23 Incoming vlan: Vlan 2 Outgoing interface list: GigabitEthernet 4/13 (*, 225.1.2.1), uptime 00:04:16 Incoming vlan: Vlan 2 Outgoing interface list: GigabitEthernet 4/11 GigabitEthernet 4/13 (165.87.1.7, 225.1.2.1), uptime 00:03:17 Incoming vlan: Vlan 2 Outgoing interface list: GigabitEthernet 4/11 GigabitEthernet 4/13 GigabitEthernet 4/20 Example (VLT) Dell#show ip mroute vlt IP Multicast Routing Table 1082 Multicast