Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 686

Usage Information Example (Summary) Example (1) Example (2 Summary) Related Commands Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Introduced. Executing this command without the optional ring-id command clears the statistics counters on all the available rings. The system requires a command line confirmation before the command executes. This command clears the following counters: ● hello Rx and Tx counters ● Topology change Rx and Tx counters ● The number of state change counters Dell# show frrp summary Ring-ID State Mode Ctrl_Vlan Member_Vlans 2 UP Master 2 11-20, 25,27-30 31 UP Transit 31 40-41 50 Down Transit 50 32 Dell# Dell# show frrp 1 Ring protocol 1 is in Master mode Ring Protocol Interface: Primary : TenGigabitEthernet 0/16 State: Forwarding Secondary: Port-channel 100 State: Blocking Control Vlan: 1 Ring protocol Timers: Hello-Interval 50 msec Dead-Interval 150 msec Ring Master's MAC Address is 00:01:e8:13:a3:19 Topology Change Statistics: Tx:110 Rx:45 Hello Statistics: Tx:13028 Rx:12348 Number of state Changes: 34 Member Vlans: 1000-1009 Dell# Dell# show frrp 2 summary Dell# show frrp 2 summary Ring-ID State Mode Ctrl_Vlan Member_Vlans 2 Up Master 2 11-20, 25, 27-30 Dell# protocol frrp - enters the resilient ring protocol and designate a ring identification. 686 Force10 OS Resilient Ring Protocol (FRRP)