Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 265

seq 5 deny any order 2 seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0 packets) show mac accounting access-list This command displays ACL Mac accounting information. C9000 Series Syntax Parameters show mac accounting access-list {acl_name} {interface | cam_count} access-list acl_name interface cam_count Display accounting information of all L2 access-lists configured. Display accounting information for specified access-list. Display accounting information for L2 access-list attached to a particular interface. Display accounting information of L2 access-lists with cam_count. Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.5.1.0 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for 4-port 40G line cards on ExaScale. Introduced on the E-Series ExaScale. Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series Introduced on the E-Series. Usage Information Example Displays occur only if the access-list is attached to an interface. If no access-list is attached to the interface, no information displays and you are returned to the DELL# prompt. show mac accounting access-list mac access-list standard mac seq 5 permit 11:22:33:44:55:66 count seq 10 deny any log threshold-in-msgs 10 interval 5 order 1 seq 15 permit any order 2 monitor ! Access Control Lists (ACL) 265