Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 886

Usage Information Version 7.7.1.0 Description Introduced on the E-Series. On the C-Series and S-Series, unregistered multicast data traffic drops when you disable flooding; they do not forward the packets to multicast router ports. On the C-Series and S-Series, in order to disable Layer 2 multicast flooding, disable Layer 3 multicast (no ip multicast-routing). Use this command in Configuration Terminal Batch mode to control the flooding behavior in a dual-homing setup. ip igmp snooping last-member-query-interval The last member query interval is the maximum response time inserted into Group-Specific queries sent in response to GroupLeave messages. C9000 Series Syntax Parameters ip igmp snooping last-member-query-interval milliseconds To return to the default value, use the no ip igmp snooping last-member-query-interval command. milliseconds Enter the interval in milliseconds. The range is from 100 to 65535. The default is 1000 milliseconds. Defaults 1000 milliseconds Command Modes INTERFACE INTERFACE (BATCH Mode) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.10(0.0) 9.9(0.0) 9.5(0.1) 9.2(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Introduced on the Z9500. Introduced on the M I/O Aggregator. This command is supported in ProgrammableMux (PMUX) mode only. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information The last-member-query-interval is also the interval between successive Group-Specific Query messages. The ip igmp snooping last-member-query-interval command allows you to change the lastmember-query interval. 886 Internet Group Management Protocol (IGMP)