Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 287

match community To match routes that have a certain COMMUNITY attribute in their BGP path, configure a filter. C9000 Series Syntax Parameters match community community-list-name [exact] To delete a community match filter, use the no match community command. community-listname exact Enter the name of a configured community list. (OPTIONAL) Enter the keywords exact to process only those routes with this community list name. Defaults Not configured. Command Modes ROUTE-MAP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands ip community-list - configures an Community Access list. set community - specifies a COMMUNITY attribute. neighbor send-community - sends COMMUNITY attribute to peer or peer group. match interface To match routes whose next hop is on the interface specified, configure a filter. C9000 Series Syntax Parameters match interface interface To remove a match, use the no match interface interface command. interface Enter the following keywords and slot/port or number information: ● For the loopback interface, enter the keyword loopback then a number from zero (0) to 16383. Access Control Lists (ACL) 287