Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 528

Command History Related Commands Version 9.10(0.0) Description Introduced on the C9010, S6000, S6000-ON, Z9100-ON and S6100-ON. pfc-nodrop-priority l2-dlf drop - configures to drop the unknown unicast packets flooding on lossless priorities. show hardware pfc-nodrop-priority - displays the packets drop count corresponding to the priority. clear pfc counters Clear the PFC TLV counters and PFC statistics on an interface or stack unit. C9000 Series Syntax Parameters clear pfc counters [port-type slot/port | stack-unit {unit number | all } all stack-ports all}] | interface {statistics}] port-type Enter the keywords port-type then the slot/port information. stack-unit unit number Enter the keywords stack-unit then the stack-unit number to be cleared. all stack-ports all Enter the keywords all stack-ports all to clear the counters on all interfaces. statistics Enter the keyboard statistics to clear the hardware PFC counters. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.7(0.1) 9.7(0.1) 9.7(0.0) 9.0.2.0 8.3.19.0 8.3.12.0 8.3.16.0 Introduced on the C9010. Introduced on the S3048-ON. Introduced on the S4048-ON. Introduced on the S6000-ON. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the MXL 10/40GbE Switch IO Module. Usage Information If you do not use the statistics parameter, both hardware and DCBx counters clear. 528 Data Center Bridging (DCB)