Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 78

Related Commands 226 Transfer complete 329 bytes received in 0.018 seconds (17.95 Kbytes/s) ftp> ftp-server topdir - sets the directory to be used for incoming FTP connections to the E-Series. ftp-server username - sets a username and password for incoming FTP connections to the E-Series. ftp-server topdir Specify the top-level directory to be accessed when an incoming FTP connection request is made. C9000 Series Syntax Parameters ftp-server topdir directory directory Enter the directory path. Defaults The internal flash is the default directory. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information Related Commands After you enable FTP server functions with the ftp-server enable command, Dell Networking recommends specifying a top-level directory path. Without a top-level directory path specified, the system directs users to the flash directory when logging in to the FTP server. ftp-server enable - enables FTP server functions on the switch. ftp-server username - sets a username and password for incoming FTP connections. ftp-server username Create a user name and associated password for incoming FTP server sessions. C9000 Series Syntax ftp-server username username password [encryption-type] password 78 Control and Monitoring