Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 646

1. Use the cam-acl l2acl command from CONFIGURATION mode. 2. Save the running-config to the startup-config. 3. Reload the system. show ip dhcp binding Display the DHCP binding table. C9000 Series Syntax show ip dhcp binding Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Example Dell# show ip dhcp binding IP address 1.1.1.253 1.1.1.254 Hardware address Lease expiration 00:00:00:00:00:10 Jan 08 2014 23:57 00:00:00:00:00:20 Jan 08 2014 23:57 Type Automatic Automatic show ip dhcp snooping Display the contents of the DHCP binding table or display the interfaces configured with IP Source Guard. C9000 Series Syntax Parameters show ip dhcp snooping [binding | source-address-validation [discard-counter | interface interface]] binding source-addressvalidation discard-counter interface interface Display the interfaces configured with IP Source Guard. Display the interfaces configured with IP Source Guard. Display the drop count of the packets. Enter the keyword interface then type one of the following interface types and slot/port or number information: ● For a 1-Gigabit Ethernet interface, enter the keyword gigabitethernet. 646 Dynamic Host Configuration Protocol (DHCP)