Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 981

Default Disabled Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Usage Information If the flowlabel value is already set for BGP or SSH, the system defaults to the already configured value. All packets on the same connection are considered part of the same flow by the system. For new connections, set the new flowlabel to zero. ipv6 host Assign a name and IPv6 address for the host-to-IPv6 address mapping table. C9000 Series Syntax Parameters ipv6 host name ipv6-address To remove an IP host, use the no ipv6 host name {ipv6-address}. name ipv6-address Enter a text string to associate with one IP address. Enter the IPv6 address (X:X:X:X::X) to be mapped to the name. Defaults Not configured. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 9.0.0.0 8.3.19.0 8.3.7.0 8.4.2.1 8.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Introduced on the C-Series and S-Series. Introduced on the E-Series TeraScale. IPv6 Basics 981