Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1078

The mtrace command traverses the path of the response data block in the reverse direction of the multicast data traffic. The mtrace command traverses the reverse path to the source from the destination. As a result, the tabular output of the mtrace command displays the destination details in the first row, followed by the RPF router details along the path in the consequent rows, and finally the source details in the last row. The tabular output contains the following columns: ● Hop - a hop number(counted negatively to indicate reverse-path) ● OIF IP - outgoing interface address ● Proto - multicast routing protocol ● Forwarding code - error code as present in the response blocks ● Source Network/Mask - source mask ip mroute Assign a static mroute. C9000 Series Syntax Parameters ip mroute destination mask {ip-address | null 0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance] To delete a specific static mroute, use the no ip mroute destination mask {ip-address | null 0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance] command. To delete all mroutes matching a certain mroute, use the no ip mroute destination mask command. destination Enter the IP address in dotted decimal format of the destination device. mask Enter the mask in slash prefix formation ( /x ) or in dotted decimal format. null 0 (OPTIONAL) Enter the keyword null then zero (0). [protocol (OPTIONAL) Enter one of the routing protocols: [process-id | tag] ip-address] ● Enter the BGP as-number then the IP address in dotted decimal format of the reverse path forwarding (RPF) neighbor. The range is from 1 to 65535. ● Enter the OSPF process identification number then the IP address in dotted decimal format of the RPF neighbor. the range is from 1 to 65535. ● Enter the IS-IS alphanumeric tag string then the IP address in dotted decimal format of the RPF neighbor. ● Enter the RIP IP address in dotted decimal format of the RPF neighbor. static ip-address (OPTIONAL) Enter the Static IP address in dotted decimal format of the RPF neighbor. ip-address (OPTIONAL) Enter the IP address in dotted decimal format of the RPF neighbor. distance (OPTIONAL) Enter a number as the distance metric assigned to the mroute. The range is from 0 to 255. Defaults Not configured. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) Introduced on the C9010. 1078 Multicast