Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 451

Usage Information Related Commands Version 7.2.1.0 Description Introduced. When you enable soft-reconfiguration for a neighbor and you execute the clear ip bgp soft in command, the update database stored in the router is replayed and updates are re-evaluated. With this command, the replay and update process is triggered only if route-refresh request is not negotiated with the peer. If the request is indeed negotiated (after executing the clear ip bgp soft in command), BGP sends a route-refresh request to the neighbor and receives all of the peer's updates. clear ip bgp - activates inbound policies without resetting the BGP TCP session. capture bgp-pdu max-buffer-size Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses. C9000 Series Syntax Parameters capture bgp-pdu max-buffer-size 100-102400000 100-102400000 Enter a size for the capture buffer. Defaults 40960000 bytes Command Modes ● EXEC ● EXEC Privilege Command History Version 9.9(0.0) 9.2(1.0) 8.2.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced Related Commands ● show capture bgp-pdu neighbor - configures a route reflector and clients. ● capture bgp-pdu neighbor - enables capture of an IPv4 BGP neighbor packet. capture bgp-pdu neighbor (ipv6) Enable capture of an IPv6 BGP neighbor packet. C9000 Series Syntax Parameters Defaults capture bgp-pdu neighbor ipv6-address direction {both | rx | tx} To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-pdu neighbor ipv6-address command. ipv6-address direction {both | rx | tx} Enter the IPv6 address of the target BGP neighbor. Enter the keyword direction and a direction- either rx for inbound, tx for outbound, or both. Not configured. Border Gateway Protocol 451